Micro fine boring head
Ø 0.3 - 19.1
Ø 0.3 - 19.1
Fine boring heads
Ø 3.0 - 88.1
Ø 3.0 - 88.1
Multi-Head
Ø 3.0 - 320.1
Ø 3.0 - 320.1
Vario-Head
Ø 3.0 - 152.1
Ø 3.0 - 152.1
Fine boring head
Ø 23.9 - 203.1
Ø 23.9 - 203.1
Fine boring head
Ø 86.0 - 402.1
Ø 86.0 - 402.1
Combi-Head
Ø 29.5 - 115.5
Ø 29.5 - 115.5
Fine boring module
Contact
TECHNICAL SUPPORT
Peter Heinemann
Director Engineering and Product Management
Tel.: +41 (0) 71 634 85 03
p.heinemann@swisstools.org
Finishing tools analog / digital Ø23.9-203.1
Reversal adapter for reverse machining- for use in fine boring heads from serie C00/C04
- the insert holders from serie C14 will be fitted backwards on the adapter
Start inquiry
| Bestell-Nr. | Ø A min. | Ø A max. | D | L | X | Feinbohrkopf | dxf | step |  |
|
| C24.011.065.008 | 37 | 44 | 20 | 8.5 | 6.5 | C04.020.024.045 |  |
 |
 | |
| C24.011.080.008 | 40 | 51 | 20 | 8.5 | 8 | C04.020.024.045 | |
|
| |
| C24.013.065.007 | 44 | 53 | 25 | 7.6 | 6.5 | C04.025.031.056 | |
|
| |
| C24.013.100.007 | 51 | 60 | 25 | 7.6 | 10 | C04.025.031.056 | |
|
| |
| C24.017.065.013 | 53 | 64 | 32 | 13.3 | 6.5 | C04.032.040.066 | |
|
| |
| C24.017.100.013 | 60 | 71 | 32 | 13.3 | 10 | C04.032.040.066 | |
|
| |
| C24.022.065.016 | 64 | 80 | 42 | 16.2 | 6.5 | C04.040.051.075 | |
|
| |
| C24.022.120.016 | 75 | 91 | 42 | 16.2 | 12 | C04.040.051.075 | |
|
| |
| C24.030.100.027 | 87 | 107 | 55 | 27 | 10 | C04.050.067.090 | |
|
| |
| C24.030.100.027 | 107 | 136 | 72 | 47 | 10 | C04.063.087.110 | |
|
| |
| C24.030.100.027 | 136 | 173 | 90 | 77 | 10 | C04.080.116.140 | |
|
|
Swiss Tool Systems AG
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Wydenstrasse 28
CH-8575 Bürglen
S witzerland
Tel. +41 (0) 71 634 85 20
www.swisstools.org
www.swisstools.org
Swiss Tool Systems AG